How to drill a deep water well?

Generally speaking, there are three types of construction procedures for drilling deep water wells:

 

1. Be convenient and healthy. Drill the well, find some charcoal, wrap it in a bag and throw it down. Pressed at the bottom of the well, it can absorb foreign toxins. There is water. Put a few small fish. Test water quality for safety. They are all very spiritual.

 

Second, it is necessary to consider whether the depth of the well is reasonable. Is there any damage to the inverted cable conduit or the like?

 

 

Three, in line with traditional stress. The method of feng shui is based on water, and the utilization and development of wells is an important symbol of human transformation of nature and further expansion of living space. Now except for remote areas, tap water is used everywhere, and water wells are not as important as before, but water wells are still used in some places in the countryside, and water wells are also dug in villa areas in cities for backup.

1. Select the wellhead position. According to the requirements, dig a circular well with the same diameter as the drill bit and approximately the same depth as the drill bit, and put the drill bit into it.

 

2. Align the drilling machine turntable hole with the round well to be dug, and place the drilling machine. Hang a rope from the pulley above the derrick and tie an object, adjust the outrigger so that the rope is aligned with the turntable hole, and place a large wooden block under the outrigger to make the outrigger stable and reliable.

 

3. Dig a mud pool with a width of 2 meters, a length of 3 meters and a depth of 1 meter near the deep water well drilling machine 5 meters away, which is used for mud mixing when the drilling rig drills into the sand layer.

 

4. Place a submersible pump in a well or other water source near the well machine point, and connect the submersible pump to the pressure head with a water pipe. It is used for flushing mud when drilling.

 

5. When docking the drill pipe, the throttle of the diesel engine should be small, and the drill pipe should not swing left and right as far as possible, so as to avoid premature damage to the drill pipe thread.

 

6. When the drilling speed of the drill bit encounters the hard soil layer and the drilling speed is slow, the pressure rod can be used to increase the speed. If the drill pipe is skewed, the hook on the pressure rod can be used to adjust it.

 

7. When drilling wells, according to the geological conditions, it is determined to use clean water or mud when drilling the soil layer, and use mud to mix sand when encountering sand layers to avoid stasis.

 

8. After the work of the drilling rig is completed, the rod must be withdrawn. When withdrawing the rod, the lifting wrench is pulled to rotate the drum through friction to drive the drill pipe up. When the screw head of the female rod is exposed. Close the valve below the turntable, put on the reverse gear, and you can withdraw the rod.

 

9. When withdrawing the rod, pay attention to avoid the swing of the mother rod to avoid thread damage, and at the same time, the staff should tighten the wire rope. As soon as the thread is disengaged, it is separated immediately. Avoid relative movement between the external thread and the internal thread, which will damage the thread.

 

YG is a professional drill rig manufacturer. We provide various depths and styles of water well drilling rigs, such as small water well drilling rig, trailer mounted water well drilling rig, truck mounted water well drilling rig, pneumatic crawler drill rig, etc. In addition, YG also provides down the hole drilling machine, diamond core drilling rig, Small DTH Hammer Drilling Rig and other drilling rigs.

Will Plastic Straws Be Completely Replaced By Paper Straws?

 According to data previously released by the National Bureau of Statistics, the annual consumption of plastic straws in 2019 is nearly 30,000 tons, or about 46 billion. A large fence can be built around the equator of the earth. Judging from this data, the strongest “plastic restriction order” has pushed the degradable materials market into a broader space. Starting from January 1, 2021, the beverage industry responded to the national “plastic straw ban” and replaced it with paper straws. Paper straws are gradually replacing plastic straws, and the future development space is extremely considerable. So will plastic straws be completely replaced by paper straws?

With the implementation of the plastic restriction order, more and more catering-related brand companies have introduced paper straws instead of plastic straws in response to the implementation of the national plastic restriction order, but the effect is not ideal, and even some “stretch”. Hot searches about paper straws are also frequently on the list, generating a huge amount of discussion and attention.

Some consumers are not satisfied with the implementation of this measure. There are many specific reasons, such as affecting the real taste of the drink, deforming and softening after a long period of liquid immersion, residual paper scraps, etc., and also because of the material of the paper. If the lipstick It is more difficult to remove the marks left on it.

We can see that although paper straws are more environmentally friendly than plastic straws, they do not achieve the actual function of straws. So, will the unfriendly plastic straws really be replaced by the full rollout of paper straws?

1. What are the hazards of plastic straws?

Plastic is a kind of high molecular polymer, which is a compound that is assembled after some monomers are used as raw materials through some addition polycondensation reactions. At present, plastic straws are made by automatic plastic straw making machines.

The main component of plastic is resin. Because of the non-polarity of plastic, it cannot be dissolved in water, acid, alkali, etc., and its molecular structure is very stable, and it cannot be affected by external environments such as temperature, so this is the main reason why it cannot be degraded. Simply put, it is like a solid wall that is hard to collapse.

It affects and harms agriculture, biology, human body, etc. Take agriculture as an example. Due to the long-term accumulation of plastics, the land cannot digest plastics. Its existence will destroy the ecological chain of the land, thus affecting the environment in the land. The crops that grow out may even fail to grow, resulting in a continuous reduction in crop yields and affecting our ecological environment.

2. Why advocate the use of paper straws?

First of all, the biggest advantage of paper straws is that the big problem that plastic straws have not solved is degradation. Because the main component of paper straws is virgin paper, which can be recycled, the degradation time is generally about 3–4 months. Commercially, paper straws are mass-produced using paper straw machines.

So not only straws but paper alternatives can also be seen in other industries, all of which are designed to play an environmentally friendly role. In fact, it does have a certain role in promoting. And there are no harmful chemical ingredients, which is much safer.

3. Will paper straws completely replace plastic straws?

Although paper straws are environmentally friendly, there are also problems. The softness, residue, and impact on taste mentioned by many consumers are all caused by the heat-labile nature of the paper, which is also one of the difficulties faced by paper straws.

Because it is inevitable that there will be hot drinks in restaurants, and the time required for people to drink is often uncertain, paper products cannot be immersed in liquid for a long time.

And many ingredients are often added to milk tea, such as pearls, burnt grass jelly, taro paste, etc. Paper straws cannot guarantee the integrity of the taste of these ingredients during the inhalation process.

Obviously, there are still many problems with the paper straws currently manufactured, but it is obviously not feasible to use all plastic. In the future production of straws, we still need to explore and create, such as research on the degradation of plastics. A small number of industries have launched degradable plastic straws, but it will take a practical process to implement them nationwide, including from production, launch, to overall feedback and so on.

For us personally, it is also very important to reduce the use of straws in our daily life. If it is a pure liquid, we can stop using it without using straws. Try to refuse this kind of disposable product. Although such a move is small, it does not mean that it is a dispensable thing, at least it is something we can do within our capacity, and it is also a very meaningful thing.

Many people think that it doesn’t matter whether you use a straw or not. Small straws can’t cause major environmental pollution, but it’s because everyone has such an irresponsible attitude that has nothing to do with me that there will be more and more waste. Resource behavior occurs.

It is not only when the problem has already happened around you that you know how to stop, reduce, and eliminate it. At that time, it is really too late.

New Paper Container-Paper Plate Making Machine

 The paper tableware industry has achieved rapid development in the past few years, and its market size and development trend have received more and more attention. China’s paper tableware industry refers to tableware made of paper, including paper cups, paper plates, paper plates, paper bags, etc. With the improvement of people’s living standards, consumers pay more and more attention to health and hygiene, so more people choose to use paper tableware; ②The government supports the development of the paper tableware industry, and government policies give the paper tableware industry more development opportunities; ③Enterprise capital investment, the technical level of the paper tableware industry has been continuously improved, and the product quality has been guaranteed.

Automatic Paper Plate Machine

The automatic paper plate machine is developed and designed according to the market demand. The national pneumatic high-speed automatic paper cup manufacturing machine has independent intellectual property rights and has automatic paper feeding, forming disc output, and constant temperature control. Automatic counting and other functions, fast working speed, safe operation, and convenient maintenance.

The high-speed intelligent paper tray machine adopts a desktop layout, which isolates the forming mold from the transmission part. The transmission part is arranged in the frame box body under the table top. It adopts mechanical transmission, hydraulic molding, and pneumatic blowing, so the molding is stable and easy to operate. The electrical appliances are controlled by PLC, the whole process of photoelectric tracking and monitoring, fully automatic safe and intelligent production, and can be directly matched with assembly line production.

Disc Machine Features

It has the functions of automatic pneumatic paper feeding, upper and lower mold heating and forming, automatic output, constant temperature control, automatic counting, and other functions. It is ideal equipment for producing various specifications of round paper plates, square paper plates, and special-shaped paper plates. Compared with the traditional paper tray machine, the new horizontal push paper tray machine adopts the principle of mechanical cam, which has higher production speed, no need for air compressor support, more stable operation, less Paper waste rate, and more humanized structural design and other advantages.

Widely used in the production of plates made of paper or aluminum foil. Round or square dishes and plates of different specifications and shapes can be produced by exchanging the molds.

YG not only supply the paper cup and plate forming machine but also supply other supporting machine. such as paper cup printing machine, paper cup roll die cutting machine, paper cup sleeve machine, coffee cup making machine, etc.

Advantage Description

Using a cam to control mold forming, no need to buy an air compressor to save more electricity, and no need to buy an air compressor to save cost and land.

The machine adopts PLC control, and the machine operation is more intelligent.

The machine adopts horizontal pushing operation, and the paper sheets are all under control from paper suction, paper pushing, forming, and counting, which greatly reduces the problem of paper waste

The new machine runs at a fast speed, and the stable running speed of a single station is 50 to 60 per minute, while the traditional paper plate machine has a single station of 40–50 per minute

The inside of the machine adopts a deceleration motor. The machine runs fast, has a long life, and is stable. However, the traditional deceleration box and motor separation structure have the disadvantages of slow running speed and frequent replacement of the running belt in the future.

The machine runs stably and is not prone to paper jams with the double-pushing structure, and the production efficiency is high. The traditional direct push structure is easy to jam and the speed is slow.